Roofs are in different kinds and designs. However, when it comes to new roof installation Trenton MI., there are common designs that you would love to install on your building. In this article, we will share the advantages of these common top 3 roof designs.
Top 3 New Roof Installation Trenton MI. Designs and Their Advantages
Here are the most common roof designs in Trenton Michigan, and their advantages:
1. Hip Roof Design
A hip roof is a kind of roof with slopes on each side. There is no one vertical side on the roofing system. The technical part of the hip roof is the ridge, where it meets with other roof sections. Hip roofs are in varieties of sizes and types. Here are the common types of hip roofs we have:
- Regular hip: This is the simplest form of hip roof available. There are four rectangular faces on the regular hip roof. However, the two sides are much longer than the other. As a result, this kind of roofing has smaller attic spaces.
- Half hip: This type of hip roof is a hybrid of hip and gable roof designs in combination. Towards the bottom, the roof looks like a gable, but it is like a hip at the peak.
- Cross hip: This kind of hip roof is installed over L-shaped structures. The roof design is two sections of hipped roofs combined at the cross-section of the building. A roof valley forms where the sections of the roof connect.
There are advantages and disadvantages of hip roofs. However, here are some of the good sides we need to reckon with:
- Due to their aerodynamics, hip roofs have good resistance to wind
- They can contain wrap-around gutters
- They have proper ventilation
- They offer functional drainage
2. Gable Roof Design
Gable roofs have two sloping sides connecting at the roof’s peak to create a ridge. The slopes form triangular extensions at the end. The triangular extension is known as the gable. Gable roofs are of various types. Here are the 3 most common types.
- Front gable roof: In this case, the house’s front entrance is right under the roofright under the roof. The roof is installed facing the street.
- Side gable roof: In this kind of gable roof, the entrance is installed under the gutter side of the house and not the gable side.
- Cross gable roof: This kind of roof has several gable roofs that intersect each other gables meet at the roof ridges when they are perpendicular to each other.
Advantages of the gable roofing include the following:
- They are simple to install
- They have enough attic space
- There is enough room for drainage
- They are affordable
3. Flat Roof Design
Do you need a roof with a low pitch? Then the flat roof design is the best for you. However, a flat roof is not all that flat because it requires a little slope to drain water from the roof. The types of flat roofs we have included the following:
- Membrane: This kind of roof features sheets of material like rubber. It lies flat on the roof surface. Weigh or glue can hold down the membrane in one place.
- Built-up: This roof type consists of several layers of roofing materials such as tar, gravel, and ply sheet.
- Modified bitumen: This kind of roof combines rubber, plastic, and polyester or fiberglass.
Flat roofs have some commercial properties. However, flat roofs can be used for residential homes. Here are some of the advantages of using the flat roof design.
- They do not consume much roofing materials, so they are more economical
- They are easy to install
- Inspection and maintenance costs are affordable
- They provide extra outdoor space
Conclusion
There are several kinds of roofing designs with their advantages. However, before you make your choice of roofing design for your new roof installation Trenton MI., you should consult your roofer and know the type that suits your environment. Even though you have the finance, it is right to go with professional advice.
